Telp :+86-18059296519

Surel : [email protected]

हिंदी हिंदी

APA YANG SEDANG ANDA CARI?

Pipa Baja Tahan Karat 304 Tabung Tutup Ujung Las Butt Flange Pipa Grosir Batang Logam Bulat Berkualitas

Produk

Rumah Produk Flensa Baja Flensa Berulir

Threaded flange

Threaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, aside from the standard NPT form as designated by the ASME B16.5 specification.

Ukuran :
1/2”-60”
Standar :
ANSI, JIS, DIN, BS,GOST
Bahan :
Stainless Steel (ASTM A182 F304/304L, F316/316L, F321)
Tekanan :
CLASS 150, CLASS 300, CLASS 600, CLASS 900,CLASS 1500, CLASS 2500, CLASS 3000
Tipe wajah :
F.F., R.F., R.T.J. ,M.F.,T.G.

Tanyakan Sekarang

KATEGORI PRODUK

bagaimana kami dapat membantu Anda

Telp : +86-18059296519

Whatsapp : +8618059296519

Surel : [email protected]

HUBUNGI KAMI

produk baru

Tutup Ujung SUS304 Berkualitas Tinggi-EC1
BACA SELENGKAPNYA

Rincian Produk

Stainless Steel Threaded Flange-WS1

Even though the threaded flange design is available in many sizes and pressure ratings, it is mainly used for small sized piping systems i.e. ≤ 4 inches. Its usage is also typically restricted to non-toxic systems, low pressure systems, and low temperature systems. ½ inch to 2-inch size threaded flanges are much more common than sizes of 2 inches and above. Due to their lower pressure applications, threaded flanges use flat and raised faces only. They are not suitable for high temperature applications because the thread geometry would distort, which often leads to leakage.

The major advantage with threaded flanges is that they can be connected to a pipe without the need for welding. Forming joints without needing to weld is a considerable advantage, and is essential in some locations and industries e.g. explosive areas (Ex rated areas) such as petrol stations, hexagon plants, stores with flammable fluids etc. If no welding is required, a potential source of ignition is removed. Another advantage is that it is quicker and easier to assemble and disassemble a threaded flange joint than a welded flange joint.

Threaded flanges are not suitable for pipes that have a thin wall thickness, since cutting a thread on such pipes is difficult. In some cases, a seal weld may be used to increase the flange’s integrity and reduce the likelihood of leakage. Adding a seal weld will increase the flange’s integrity, but it also makes the joint more difficult to assemble and disassemble (because the weld makes it a permanent joint).

TAG PANAS : Flensa Baja Tahan Karat Stainless Steel Plate Flange slip-on flange threaded flange

Tinggalkan pesan

Jika Anda tertarik dengan produk kami dan ingin mengetahui lebih detail, silakan tinggalkan pesan di sini, kami akan membalas Anda sesegera mungkin.

Produk-produk terkait

Flange Berulir Baja Tahan Karat-WS1

Flensa berulir, juga kadang-kadang disebut sebagai flensa pendamping / flensa sekrup / flensa NPT, berisi ulir NPT betina di tengahnya untuk sambungan ke pipa ulir NPT jantan. Flensa berulir umum digunakan saat membuat sambungan pereduksi. Model ulir lainnya tersedia untuk pemesinan, selain bentuk NPT standar sebagaimana ditetapkan oleh spesifikasi ASME B16.5.